****************************************************************************** ****** CHANGE LOG ****** CHANGE LOG ****** CHANGE LOG ****** CHANGE LOG ****** ****************************************************************************** Version 2.25/2.26 ================= *** Important: THIS VERSION CONTAINS SIGNIFICANT CHANGES TO ONE OF THE CORE COMPONENTS OF MEGALIB. AS CONSEQUENCE, THIS VERSION IS MORE EXPERIMENTAL AS USUAL! + Test if your detector effect engine still works! For the introduction of named detectors a partial redesign of the detector effects engine was necessary. + Check if you still use the Compton reponse, which you want to use, in the mimrec UI, since a new (actually an old) one was re-added. *** Significant new features & improvements: General: + New website: megalibtoolkit.com + New public repository: https://github.com/zoglauer/megalib + One step setup script for MEGAlib + Added installation scripts for ROOT, Geant4 (9.5 and higher), and HEAsoft. They can be found in the config directory, e.g. build-root.sh + Improved configuration script: "./configure" should be all you need to do + The change log and license are now displayed when one of the GUI tools. This adds a new configuration file called .megalib.cfg storing hashes of both files. Cosima: + Compatibility with 9.5, dropped compatibility with 9.3 + Updated hadronic physics-lists Sivan: Geomega: + The preferred way to define components of materials is now via MyMaterial.ComponentBy[Atoms/Mass] Cs 1 This way Geant4 can give the correct atomic mass and isotope composition from its data bases. This definition is expected for activation simulations, where cross-sections per isotope are present + Named detectors: It is now possible to derive named detectors from normal detectors, which inhert all their properties except those explictly overwritten by the named detector. This allows to give detectors consisting of identical volumes different detector characteristics such as energy resolution Revan: Mimrec: + The response which caluclated the width of the Compton cones from uncertainties has been reintroduced. Check if you still use the Compton reponse, which you want to use, in the mimrec UI Realta: Spectralizer: Examples: + DetectorEffectEngine: Show all options of the detector effects engine and serves as unit test + Hadron therapy example + Graded Z-example ... plus many, many smaller things I already forgot about :) *** Important bug fixes: ****************************************************************************** Version 2.23/2.24 ================= *** Important: + If no depth resolution was present, the depth resolution in the calorimeters was ideal instead of centered in the voxel This bug was there for a long time... *** Significant new features & improvements: General: + Changes throughout MEGAlib to enable multi-threading + Replacement of TString with new thread-safe MString class + Redesign of GuiData/Setting-classes to allow reuse in different projects + There are a set of advanced examples in resource/examples/advanced + Improved support for Windows Cosima: + Updates for Geant4 9.4 (this is now the requirement) + New beam: FarFieldNormalizedEnergyBeamFlux combination Sivan: + New plot: Incidence vs measured energy + New plot: Energy loss by material Revan: + Significant improvements in the interface to use Revan as a library Mimrec: + Significant improvements in the interface to use Mimrec as a library + Absorptions are working correctly again in combination with Comption mode to allow Compton+coded imaging Realta: + Complete reimplementation: Allow real time analysis of Compton events Spectralizer: + Initial version of a spectral analysis package by Michelle! ... plus many, many smaller things I already forgot about :) *** Important bug fixes: + If no depth resolution was present, the depth resolution in the calorimeters was ideal instead of centered in the voxel This bug was there a long time... ****************************************************************************** Version 2.21/2.22 ================= *** Important: + From now on uneven minor releases are development versions, even ones are releases (similar to ROOT) + Mark Kippen dropped his G4LECS support, thus Geant4 9.2 is required + There was a problem when you have copies of scintillator detectors with multiple sensitive volumes resulting in hits not always being put into the same detector. This resulted in a complex fix with several restrictions when you can use multiple sensitive volumes in one scintillator detector. + Mimrec has been partly rewritten - perform tests if everything still works + Partial Windows support means changes in many classes + Cosima now uses the trigger criteria from Geomega - check if your triggers are still OK *** New features & improvements: General: + Partial support for Windows + Changes in MGUIMain + New configuration option --optimizehard + Configuration: Check for additional programs: doxygen, expect, convert + Update check implemented + make update now (1) updates (2) reconfigures (3) compiles Geomega: + Added new system object with the characteristic to noise the event time. + Under certain circumstances the IsDetector characteristics was wrong and thus the volume sequence (but this always resulted in error messages) Cosima: + Mark Kippen dropped his G4LECS supported, thus Geant4 9.2 is required and the G4LECS part of Cosima is removed + Prevent against negative energies during application of energy loss map + Cosima now uses the trigger criteria from Geomega + Added a black absorber Sivan: + None Revan: + Added option for coincidence search + Added option for exporting the spectrum as ASCII + Experimental new version of CSR with ToF and energy recovery from Vincent Tatischeff and Clarisse Hamadache + Significant change in the interfaces to allow processing in external pipeline Mimrec: + Improved GUI + Speed improvements (switch between Fast & accurate maths, slow and fast tra file parsing) + Code clean up - several antique classes have been removed + Improved options for image display + HX & HZ keywords for detector orientation in horizon coordiante system: This coordinate system is used for Earth horizon cuts + Source selection works now also in galactic coordinates + Possibility to record animations of the ietartion/backprojection process as animated gif's + Significant change in the interfaces to allow processing in external pipeline *** Important bug fixes: + There was a problem when you have copies of scintillator detectors with multiple sensitive volumes resulting in hits not always being put into the same detector. This resulted in a complex fix with several restrictions when you can use multiple sensitive volumes in one scintillator detector + TI was not correctly read in if format differed from MEGAlib sim format + Cosima: DECA was in nanosec instead of sec + Previoulsy, if you had galactic coordinates then the rotation is also applied in spherical and Certesian coordinates, now it is distinguished between detector rotation and galactic pointing - you can have both + The polarization angle reported in Mimrec's polarization analysis was off by 90-(pi/2) degrees... ****************************************************************************** Version 2.20 ============ *** Important: + Known bug (fixed only in 2.21): If you have galactic coordinates then the rotation is also applied in spherical coordinates + Backport fix: There was a problem when you have copies of scintillator detectors with multiple sensitive volumes resulting in hits not always being put into the same detector. This resulted in a complex fix with several restrictions when you can use multiple sensitive volumes in one scintillator detector. + Due to problems with case-invariance of MacOSX only "cosima" is availble and no longer "Cosima" to start Cosima + The energy resolution interface bhas been updated. Verify is your spectra are still identical. *** New features & improvements: Geomega: + Append lines with "\\" keyword as last keyword + If-clauses + ForVector loop & (Position/Value-) Vector-class + EnergyLoss, EnergyResolution, EnergyCalibration update Cosima: + Included TS "total started events" and SA "start area" into file + Possibility to restrict to one run in the source file + DiffractionPointSource + StoreOneHitPerEvent + Launch mutliple instances of cosima with mcosima Sivan: + Parse observation time and simulated events in MFileSimEvents Mimrec: + SIMPLE coded-mask imaging *** Important bug fixes: + TT was not correctly handled if files were concatenated via NF + Configuration problems on Mac OSX + In Function2D was a copy paste error always using the x axis and not the y-axis, which lead to a wrong symmetry assumption + There was a problem when you have copies of scintillator detectors with multiple sensitive volumes resulting in hits not always being put into the same detector. This resulted in a complex fix with several restrictions when you can use multiple sensitive volumes in one scintillator detector + TI was not read in correctly if format differed from sim format ****************************************************************************** Version 2.19 ============ *** Important: + If you update from a previous version, you need to reconfigure MEGAlib! + This version integrates many of the response related changes intended for 3.0 into the 2.x branch. Thus test this version thoroughly. + The sim event storing routines have been rewritten. If there are problems reading older files, let me know. + The IA & SimEvent interfaces have been renamed. The old ones are still available but should give a depreciated warning. Please update your interfaces! + Partial rewrite of MFile & MFileEvents classes and all files based on it. This is another big change thus check if all files can be opened correctly. + In Cosima replaced the keywords SpectralType, Energy, Position with the keyword based Spectrum and Energy, i.e. you now don't give numbers such as "1 1" any mode but say FarFieldPointSource! + Don't use the Penelope code for Compton detector event reconstruction responses and always turn of fluorescence, since the code is not ready to handle more than one generated particle during Compton scattering *** New features & improvements: General: + SensitivityOptimizer capable of calculating sensitivity per steradian + Partial rewrite of MFile & MFileEvents + MParser, MTokenizer interface remodelling Response: + Completed switch to new response classes Cosima: + Radioactive build-up simulation (e.g. via proton irradiation) including examples and documentation is now much closer to usability + Improved integration of Geant4 visualization features + New beams: Conic beam with homogenous or gaussian distribution (from Georg) and RadialProfileBeam + Replaced the keywords SpectralType, Energy, Position with the keyword based Spectrum and Energy, i.e. you now don't give numbers such as "1 1" any mode but say FarFieldPointSource + New examples + More input sanity checks + Spectums loaded by file now allow for lin-lin, lin-log, log-lin, log-log interpolation Sivan: + The sim event storing routines have been rewritten (only latest sim format is written, new write routines allowing scientific notation. If there are problems reading older files, let me know. + The IA & SimEvent interfaces have been renamed. The old ones are still available but should give a depreciated warning. Please update your interfaces + Eliminated ECs (are IAs since a long time now) + New option: Show secondary generation pattern (=locations) Revan: + New option: Show spatial energy distribution (not only hit distribution) Mimrec: + OS-EM is available again *** Bug fixes: Revan: + The TI was not always read in correctly leading to jumps in the time sequence + The NF keyword was not honoured Mimrec: + The excluded detectors were not read in correctly in the new Xml format Cosima: + The x-y-axes of the ProfiledBeam/MapProfileBeam beam were not scaled to cm, thus the beam was a factor of 10 too narrow General: + Increased stability of multi-threading Many minor ones, segfaults and other crashes ****************************************************************************** Version 2.18 ============ *** Important: + If you update from a previous version, you need to reconfigure MEGAlib! + Due to a switch to XML in the configuration files, you have to check if they are still consistent + In old configuration files the standard maximum amount for RAM for the response slices ("back projections") was 1 GB. You should check if you do not want a larger value (mimrec -> imaging -> memory management)! + The new automatic calculation of cross section files invalidates all old cross section files since they do not have a hash value linked to the materials *** New features & improvements: General: + Integrated Cosima into MEGAlib + Improved configuration script + Mimrec/Revan/Sivan/Geomega configuration files are now XML based Geomega: + Added Geant4 based overlap search + Added automatic cross-section generation based on Geant4 + New detector type Voxel3D Mimrec: + Galactic coordinates + List-mode response calculation is now multi threaded + Out-of-memory handling for 32-bit systems + Imaging can be stopped after a certain amount of RAM is consumed Cosima: + Allow to store entries and exists of particles in certain volumes Plus many, many minor improvements *** Bug fixes: Revan (back ported to the latest version): + The TI was not always read in correctly leading to jumps in the time sequence + The NF keyword was not honoured Mimrec (back ported to the latest version): + The excluded detectors were not read in correctly in the new Xml format Many minor ones, segfaults and other crashes ******************************************************************************