<h3>SparkFun Aesthetics</h3> This library contiains non-functional items such as logos, build/ordering notes, frame blocks, etc. <br> <br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. <br> <br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. <br> <br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br> <br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>Creative Commons License Template</h3> <p>CC BY-SA 4.0 License with <a href="https://creativecommons.org/licenses/by-sa/4.0/">link to license</a> and placeholder for designer name.</p> <p>Devices using: <ul><li>FRAME_LEDGER</li> <li>FRAME_LETTER</li></ul></p> Released under the Creative Commons Attribution Share-Alike 4.0 License https://creativecommons.org/licenses/by-sa/4.0/ Designed by: <h3>Fiducial - Circle, 1mm</h3> <p>Point-of-reference for pick-and-place machines and other optical instruments.</p> <p>Devices using: <ul><li>FIDUCIAL</li></ul></p> <h3>Fiducial - Circle, 0.25in</h3> <p>Point-of-reference for pick-and-place machines and other optical instruments.</p> <p>Devices using: <ul><li>FIDUCIAL</li></ul></p> <h3>Fiducial Panel Tab</h3> <p>This is half of a tab, with fiducial reference mark, used to connect individual boards in a panel of PCBs.</p> <p>Two of these half tabs, rotated in opposite directions, can be connected together to form a full tab, with two fiducial markings. Place along the edge of a panel of PCBs, this will allow for panels with boards not connected by v-scores, which allows for easier depanelization where there are overhanging components. It can also be used for designs too small to accomodate fiducial marks on individual boards.</p> <p>Devices using: <ul><li>FIDUCIALTAB</li></ul></p> <h3>Funnel IO (FIO) Logo - Silkscreen</h3> <p>Used on the <a href="https://www.sparkfun.com/products/10116">Arduino Fio</a>.</p> <p>Devices using: <ul><li>FIO_LOGO</li></ul></p> <h3>SparkFun Logo w/ ".com" and Flame</h3> <p>SparkFun-font w/ flame and ".com"</p> <p>Devices using: <ul><li>SFE_LOGO_NAME_WEB</li></ul></p> <h3>Open-Source Hardware (OSHW) Logo - Small - Top Copper</h3> <p>Exposed copper logo for open-source hardware designs.</p> <p>Devices using: <ul><li>OSHW_LOGO</li></ul></p> <h3>Open-Source Hardware (OSHW) Logo - Medium - Top Copper</h3> <p>Exposed copper logo for open-source hardware designs.</p> <p>Devices using: <ul><li>OSHW_LOGO</li></ul></p> <h3>Open-Source Hardware (OSHW) Logo - Large - Top Copper</h3> <p>Exposed copper logo for open-source hardware designs.</p> <p>Devices using: <ul><li>OSHW_LOGO</li></ul></p> <h3>IOIO OTG Logo - Exposed Copper</h3> <p>Logo used on the <a href="https://www.sparkfun.com/products/13613">SparkFun IOIO-OTG</a>.</p> <p>Devices using: <ul><li>IOIO-OTG</li></ul></p> <h3>Four-Layer Board Warning - tDoc Layer</h3> <p>Warning text which will appear on both the schematic and the board file, notifying viewers that the design is a four-layer PCB.</p> <p>Devices using: <ul><li>FOUR_LAYER_WARNING</li></ul></p> THIS IS A FOUR-LAYER BOARD! <h3>SparkFun Font Logo w/ Flame - 0.5" Height - Silkscreen</h3> <p>SparkFun font logo with flame logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME_FLAME</li></ul></p> <h3>SparkFun Font Logo w/ Flame - 0.1" Height - Silkscreen</h3> <p>SparkFun font logo with flame logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME_FLAME</li></ul></p> <h3>SparkFun Font Logo w/ Flame - 0.2" Height - Silkscreen</h3> <p>SparkFun font logo with flame logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME_FLAME</li></ul></p> <h3>SparkFun Font Logo w/ Flame - 0.3" Height - Silkscreen</h3> <p>SparkFun font logo with flame logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME_FLAME</li></ul></p> <h3>SparkFun Font Logo w/ Flame - 0.4" Height - Silkscreen</h3> <p>SparkFun font logo with flame logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME_FLAME</li></ul></p> <h3>SparkFun Font Logo w/ Flame - 0.6" Height - Silkscreen</h3> <p>SparkFun font logo with flame logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME_FLAME</li></ul></p> <h3>SparkFun Font Logo w/ Flame - 0.7" Height - Silkscreen</h3> <p>SparkFun font logo with flame logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME_FLAME</li></ul></p> <h3>SparkFun Font Logo w/ Flame - 0.8" Height - Silkscreen</h3> <p>SparkFun font logo with flame logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME_FLAME</li></ul></p> <h3>SparkFun Font Logo w/ Flame - 0.9" Height - Silkscreen</h3> <p>SparkFun font logo with flame logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME_FLAME</li></ul></p> <h3>SparkFun Font Logo w/ Flame - 1.0" Height - Silkscreen</h3> <p>SparkFun font logo with flame logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.1" Height - Silkscreen</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.2" Height - Silkscreen</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.3" Height - Silkscreen</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.4" Height - Silkscreen</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.5" Height - Silkscreen</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.6" Height - Silkscreen</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.7" Height - Silkscreen</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.8" Height - Silkscreen</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.9" Height - Silkscreen</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Font Logo - 0.1" Height - Silkscreen</h3> <p>SparkFun font logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME</li></ul></p> <h3>SparkFun Font Logo - 0.2" Height - Silkscreen</h3> <p>SparkFun font logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME</li></ul></p> <h3>SparkFun Font Logo - 0.3" Height - Silkscreen</h3> <p>SparkFun font logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME</li></ul></p> <h3>SparkFun Font Logo - 0.4" Height - Silkscreen</h3> <p>SparkFun font logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME</li></ul></p> <h3>SparkFun Font Logo - 0.5" Height - Silkscreen</h3> <p>SparkFun font logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME</li></ul></p> <h3>SparkFun Font Logo - 0.6" Height - Silkscreen</h3> <p>SparkFun font logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME</li></ul></p> <h3>SparkFun Font Logo - 0.7" Height - Silkscreen</h3> <p>SparkFun font logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME</li></ul></p> <h3>SparkFun Font Logo - 0.8" Height - Silkscreen</h3> <p>SparkFun font logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME</li></ul></p> <h3>SparkFun Font Logo - 0.9" Height - Silkscreen</h3> <p>SparkFun font logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME</li></ul></p> <h3>SparkFun Font Logo - 1.0" Height - Silkscreen</h3> <p>SparkFun font logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME</li></ul></p> <h3>"Revision By" Text - tDoc</h3> <p>Preceding text for revisor documentation.</p> <p>Devices using: <ul><li>REVISION</li></ul></p> Revision By: <h3>SparkFun RedBot Logo - Silkscreen</h3> <p>Logo for the RedBot board. Approx. 0.5" high, 1.4" wide. Used on the <a href="https://www.sparkfun.com/products/12097">SparkFun RedBot Mainboard</a>.</p> <p>Devices using: <ul><li>REDBOT_LOGO</li></ul></p> <h3>SparkPunk Logo - 0.1" Height - Silkscreen</h3> <p>Silkscreen logo used on the <a href="https://www.sparkfun.com/products/11177">SparkFun SparkPunk Sound Kit</a> and <a href="https://www.sparkfun.com/products/12707">SparkFun SparkPunk Sequencer Kit</a>.</p> <p>Devices using: <ul><li>SPARKPUNK_LOGO</li></ul></p> <h3>SparkPunk Logo - 0.2" Height - Silkscreen</h3> <p>Silkscreen logo used on the <a href="https://www.sparkfun.com/products/11177">SparkFun SparkPunk Sound Kit</a> and <a href="https://www.sparkfun.com/products/12707">SparkFun SparkPunk Sequencer Kit</a>.</p> <p>Devices using: <ul><li>SPARKPUNK_LOGO</li></ul></p> <h3>SparkFun Flame Logo - 0.1" Height - Top Copper</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.1" Height - Top Copper (Exposed)</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.2" Height - Top Copper</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.2" Height - Top Copper (Exposed)</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.3" Height - Top Copper</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.3" Height - Top Copper (Exposed)</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Logomatic Logo - Silkscreen</h3> <p>Logo used on the <a href="https://www.sparkfun.com/products/12772">SparkFun Logomatic v2</a>.</p> <p>Silk is .4" by 1.1"<br> Board logo is .4" by 1.1" </p> <p>Devices using: <ul><li>LOGOMATIC_LOGO</li></ul></p> <h3>GestureSense Logo (w/ Text) Silkscreen</h3> <p>Used on the <a href="https://www.sparkfun.com/products/12780">ZX Distance and Gesture Sensor</a>.</p> <p>Devices using: <ul><li>GESTURESENSE_LOGOS</li></ul></p> <h3>GestureSense Logo Silkscreen</h3> <p>Used on the <a href="https://www.sparkfun.com/products/12780">ZX Distance and Gesture Sensor</a>.</p> <p>Devices using: <ul><li>GESTURESENSE_LOGOS</li></ul></p> <h3>Breadboard Spacing</h3> <p>Standard breadboard spacing, including power rails and a 30mil gap between row sets.</p> <p>Devices using: <ul><li>BREADBOARD_PATTERN</li></ul></p> Breadboard row spacing: <h3>SparkFun Smart Basic Logo - Silkscreen</h3> <p>Silkscreen logo for <a href="https://www.sparkfun.com/products/12935">SparkFun FTDI SmartBasic</a>.</p> <p>Devices using: <ul><li>SMART_BASIC_LOGO</li></ul></p> <h3>Dummy Footprint</h3> <p>NOTHING HERE!!! For when you want a symbol with no package as an option against symbols with a package.</p> <p>Devices using: <ul><li>BADGERHACK_LOGO</li> <li>FRAME-LETTER</li></ul></p> <h3>SparkFun Flame Logo - 0.1" Height - Top Stopmask</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Flame Logo - 0.05" Height - Silkscreen</h3> <p>SparkFun Flame Logo</p> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>SparkFun Education Mascot - Ludus! - Medium - Silkscreen</h3> <p>Ludus logo for SparkFun Education products.</p> <p>Devices using: <ul><li>SFE_LUDUS</li></ul></p> <h3>SparkFun Education Mascot - Ludus! - Small - Silkscreen</h3> <p>Ludus logo for SparkFun Education products.</p> <p>Devices using: <ul><li>SFE_LUDUS</li></ul></p> <h3>SparkFun Education Mascot - Ludus! - Large - Silkscreen</h3> <p>Large Ludus logo for SparkFun Education products.</p> <p>Devices using: <ul><li>SFE_LUDUS</li></ul></p> <h3>Qtechknow Logo - Small - Silkscreen</h3> <p>Silkscreen logo used on the <a href="https://www.sparkfun.com/products/13614">Qduino Mini</a>.</p> <p>Devices using: <ul><li>MIGHTYQ-S-SILK</li></ul></p> <h3>Qtechknow Logo - Large - Silkscreen</h3> <p>Silkscreen logo used on the <a href="https://www.sparkfun.com/products/13614">Qduino Mini</a>.</p> <p>Devices using: <ul><li>MIGHTYQ-L-SILK</li></ul></p> <h3>Open-Source Hardware (OSHW) Logo - Small - Silkscreen</h3> <p>Silkscreen logo for open-source hardware designs.</p> <p>Devices using: <ul><li>OSHW_LOGO</li></ul></p> <h3>Open-Source Hardware (OSHW) Logo - Medium - Silkscreen</h3> <p>Silkscreen logo for open-source hardware designs.</p> <p>Devices using: <ul><li>OSHW_LOGO</li></ul></p> <h3>Open-Source Hardware (OSHW) Logo - Large - Silkscreen</h3> <p>Silkscreen logo for open-source hardware designs.</p> <p>Devices using: <ul><li>OSHW_LOGO</li></ul></p> <h3>Lead-Free (No Pb) Logo - 0.12in Diameter</h3> <p>Logo for lead-safe certified hardware.</p> <p>Devices using: <ul><li>NO_PB_LOGO</li></ul></p> <h3>Restriction of Hazardous Substances (RoHS) Logo - 0.18in Height</h3> <p>Logo for RoHS-certified hardware.</p> <p>Devices using: <ul><li>ROHS_LOGO</li></ul></p> <h3>Open-Source Hardware (OSHW) Logo - Mini - Silkscreen</h3> <p>Silkscreen logo for open-source hardware designs.</p> <p>Devices using: <ul><li>OSHW_LOGO</li></ul></p> <h3>Special Ordering Instructions Alert</h3> <p>Indicates that the PCB material, colors, copper weights, and/or thickness are non-standard.</p> <p>(Standard is 1.6mm FR4, 1 oz copper, immersion silver plating, red soldermask, white silkscreen.)</p> <p>Use 0.7" Vector font @ 8% ratio Ordering Instructions: (Add these comments when uploading gerbers.) <h3>Special Production Instructions Alert</h3> <p>Placeholder for notes on unique production processes, which may include special wash or depaneling instructions.</p> Production Instructions: (Add these comments when uploading gerbers.) <h3>Fiducial - Circle, 0.2mm</h3> <p>Point-of-reference for pick-and-place machines and other optical instruments.</p> <p>Devices using: <ul><li>FIDUCIAL</li></ul></p> <h3>Mechanical Specification for Raspberry Pi μHat </h3> <p>Mechanical drawing was pulled directly from their <a href="https://github.com/raspberrypi/hats/blob/master/uhat-board-mechanical.pdf">Github page </a>.</p> Units in MM Min μHat Specifications - Mounting hole offset at top of board is not equal to mounting hole offset at bottom of board - Mounting holes are non-plated or electrically isolated. - Must have minimum 3 mounting holes - If non-plated landing area use trestrict and brestrict of radius 3.1mm - μHat dimensions measures are in reference Layer 49 - The box below the right mounting hole is for a 2x4 pin header on the Pi 3 Model B+. <h3>Pi Hat Mechanical Specification</h3> Min Hat Requirements: <ul> <li>Board must be 65x56 (PTH 40 Pin) or 65x56.5(SMD 40 pin) <li>3mm Radius Corners <li>Four mounting holes <li>40 pin header </ul> Mounting Holes: <ul> <li>Non Plated Landing around mounting holes: 6.2mm <li>Mounting holes: 2.75mm </ul> Reference: https://github.com/raspberrypi/hats/blob/master/hat-board-mechanical.pdf >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE <h3>SparkFun Font Logo - 0.1" Height - Silkscreen</h3> <p>SparkFun font logo</p> <p>Devices using: <ul><li>SFE_LOGO_NAME</li></ul></p> <h3>Fiducial</h3> <p>Point-of-reference for pick-and-place machines and other optical instruments.</p> <p>Devices using: <ul><li>FIDUCIAL</li></ul></p> <h3>Fiducial Panel Tab</h3> <p>Devices using: <ul><li>FIDUCIALTAB</li></ul></p> <h3>Funnel IO (FIO) Logo</h3> <p>Used on the <a href="https://www.sparkfun.com/products/10116">Arduino Fio</a>.</p> <p>Devices using: <ul><li>FIO_LOGO</li></ul></p> FIO_LOGO <h3>Schematic Frame - Letter</h3> <p>Standard 8.5x11 US Ledger frame</p> <p>Devices using<ul><li>FRAME-LETTER</li></ul></p> <h3>Schematic Documentation Field</h3> <p>Autofilling schematic symbol-layer info including board name, designer, revision, and save date.</p> <p>Devices using: <ul><li>FRAME-LEDGER</li> <li>FRAME-LETTER</li></ul></p> Date: >LAST_DATE_TIME Sheet: >SHEET REV: TITLE: >DRAWING_NAME Released under the Creative Commons Attribution Share-Alike 4.0 License https://creativecommons.org/licenses/by-sa/4.0/ Design by: >DESIGNER >REV <h3>Open-Source Hardware (OSHW) Logo</h3> <p> This logo indicates the piece of hardware it is found on incorporates a OSHW license and/or adheres to the definition of open source hardware found here: <a href="http://freedomdefined.org/OSHW">http://freedomdefined.org/OSHW</a></p> <p>Devices using<ul><li>OSHW_LOGO</li></ul></p> <h3>IOIO OTG Logo</h3> <p>Logo used on the <a href="https://www.sparkfun.com/products/13613">SparkFun IOIO-OTG</a>.</p> <p>Devices using: <ul><li>IOIO-OTG</li></ul></p> IOIO label <h3>Four-Layer Board Warning - Symbol Layer</h3> <p>Warning text which will appear on both the schematic and the board file, notifying viewers that the design is a four-layer PCB.</p> <p>Devices using: <ul><li>FOUR_LAYER_WARNING</li></ul></p> THIS IS A FOUR-LAYER BOARD! <h3>SparkFun Font Logo</h3> <p>Devices using: <ul><li>SFE_LOGO_NAME</li></ul></p> <h3>SparkFun Font Logo w/ Flame</h3> <p>Devices using: <ul><li>SFE_LOGO_NAME_FLAME</li></ul></p> <h3>SparkFun Flame Logo</h3> <p>Devices using: <ul><li>SFE_LOGO_FLAME</li></ul></p> <h3>Schematic Frame - Ledger</h3> <p>Standard 11x14 US Ledger frame</p> <p>Devices using<ul><li>FRAME-LEDGER</li></ul></p> <h3>"Revision By" Text - Symbol</h3> <p>Preceding text for revisor documentation.</p> <p>Devices using: <ul><li>REVISION</li></ul></p> Revision By: <h3>SparkFun RedBot Logo </h3> <p>Logo for the <a href="https://www.sparkfun.com/products/12097">SparkFun RedBot Mainboard</a>.</p> <p>Devices using: <ul><li>REDBOT_LOGO</li></ul></p> <h3>SparkPunk Logo</h3> <p>Logo for the <a href="https://www.sparkfun.com/products/11177">SparkFun SparkPunk Sound Kit</a> and <a href="https://www.sparkfun.com/products/12707">SparkFun SparkPunk Sequencer Kit</a>.</p> <p>Devices using: <ul><li>SPARKPUNK_LOGO</li></ul></p> <h3>SparkFun Logomatic Logo</h3> <p>Logo used on the <a href="https://www.sparkfun.com/products/12772">SparkFun Logomatic v2</a>.</p> <p>Devices using: <ul><li>LOGOMATIC_LOGO</li></ul></p> <h3>GestureSense Logo</h3> <p>Used on the <a href="https://www.sparkfun.com/products/12780">ZX Distance and Gesture Sensor</a>.</p> <p>Devices using: <ul><li>GESTURESENSE_LOGOS</li></ul></p> <h3>Schematic Frame - A4L - European Format</h3> <p>Standard A4 size frame in Landscape</p> <p>Devices using: <ul><li>FRAME-A4L</li></ul></p> >DRAWING_NAME >LAST_DATE_TIME >SHEET Sheet: >CNAME Rev: >DESIGNER >CREVISION <h3>Breadboard-Spacing Reference</h3> <p>Symbol for reference markings that correspond to solderless breadboard row spacing. Includes power rails and void space between rows.</p> <p>Devices using: <ul><li>BREADBOARD_PATTERN</li></ul></p> <h3>SparkFun Smart Basic Logo</h3> <p>Logo for <a href="https://www.sparkfun.com/products/12935">SparkFun FTDI SmartBasic</a>.</p> <p>Devices using: <ul><li>SMART_BASIC_LOGO</li></ul></p> <h3>SparkFun Education Mascot - Ludus!</h3> <p>Ludus logo for SparkFun Education products.</p> <p>Devices using: <ul><li>SFE_LUDUS</li></ul></p> Sparkfun EDU <h3>Qtechknow Logo</h3> <p>Silkscreen logo used on the <a href="https://www.sparkfun.com/products/13614">Qduino Mini</a>.</p> <p>Devices using: <ul><li>MIGHTYQ-L-SILK</li></ul></p> <h3>Lead-Free (No Pb) Logo</h3> <p>Logo for lead-safe certified hardware.</p> <p>Devices using: <ul><li>NO_PB_LOGO</li></ul></p> <h3>Restriction of Hazardous Substances (RoHS) Logo</h3> <p>Logo for RoHS-certified hardware.</p> <p>Devices using: <ul><li>ROHS_LOGO</li></ul></p> <h3>Special Ordering/Production Instructions Alert</h3> <p>Symbol for special PCB ordering instructions or unique production process warnings.</p> <p>PCB Standard is 1.6mm FR4, 1 oz copper, immersion silver plating, red soldermask, white silkscreen.</p> <p>Unique production processes may include special wash or depaneling instructions.</p> Special Instructions <h3>Mechanical Specification for Raspberry μHat </h3> <p> More information can be found here: https://github.com/raspberrypi/hats/blob/master/uhat-board-mechanical.pdf </p> μHAT MECHANICAL DRAWING GatorBit Final for Silk-01 (1).jpg controller:bit <h3>Mechanical Specification for Raspberry μHat </h3> <p> More information can be found here: https://github.com/raspberrypi/hats/blob/master/uhat-board-mechanical.pdf </p> PI-HAT MECHANICAL DRAWING RedBoard Logo >NAME >VALUE >NAME >VALUE <h3>Fiducial Alignment Points</h3> <p>Point-of-reference for pick-and-place machines and other optical instruments.</p> <h3>Fiducial Panel Tab</h3> <p>This is half of a tab, with fiducial reference mark, used to connect individual boards in a panel of PCBs.</p> <p>Two of these half tabs, rotated in opposite directions, can be connected together to form a full tab, with two fiducial markings. Place along the edge of a panel of PCBs, this will allow for panels with boards not connected by v-scores, which allows for easier depanelization where there are overhanging components. It can also be used for designs too small to accomodate fiducial marks on individual boards.</p> <h3>Funnel IO (FIO) Logo - Silkscreen</h3> <p>Used on the <a href="https://www.sparkfun.com/products/10116">Arduino Fio</a>.</p> <p>Devices using: <ul><li>FIO_LOGO</li></ul></p> <h3>Schematic Frame - Letter</h3> <p>Standard 8.5x11 US Letter frame</p> <h3>Open-Source Hardware (OSHW) Logo</h3> <p> This logo indicates the piece of hardware it is found on incorporates a OSHW license and/or adheres to the definition of open source hardware found here: <a href="http://freedomdefined.org/OSHW">http://freedomdefined.org/OSHW</a></p> <h3>IOIO OTG Logo - Exposed Copper</h3> <p>Logo used on the <a href="https://www.sparkfun.com/products/13613">SparkFun IOIO-OTG</a>.</p> <h3>Four-Layer Board Warning - tDoc Layer</h3> <p>Warning text which will appear on both the schematic and the board file, notifying viewers that the design is a four-layer PCB.</p> <h3>SparkFun Flame Logo</h3> <p>This is the SparkFun flame logo. The logo on the schematic will always be the same size; the package variant is the height of the flame. Default layer for the logo on the board is tSilk.</p> <h3>SparkFun Font Logo w/ Flame</h3> <p>This is the SparkFun full logo. The logo on the schematic will always be the same size; the package variant is the height of the flame part of the logo. Default layer for the logo on the board is tSilk.</p> <h3>SparkFun Font Logo</h3> <p>This is the SparkFun name logo. The logo on the schematic will always be the same size; the package variant is the height of the flame part of the logo (or the height the flame <b>would</b> be, if it were drawn). Default layer for the logo on the board is tSilk.</p> <h3>Schematic Frame - Ledger</h3> <p>Standard 11x14 US Ledger frame</p> <h3>"Revision By" Text</h3> <p>Preceding text for revisor documentation. Includes schematic text on "symbols" layer, and board text on tDoc.</p> <h3>SparkFun RedBot Logo - Silkscreen</h3> <p>Logo for the RedBot board. Approx. 0.5" high, 1.4" wide. Used on the <a href="https://www.sparkfun.com/products/12097">SparkFun RedBot Mainboard</a>.</p> <h3>SparkPunk Logo - Silkscreen</h3> <p>Silkscreen logo used on the <a href="https://www.sparkfun.com/products/11177">SparkFun SparkPunk Sound Kit</a> and <a href="https://www.sparkfun.com/products/12707">SparkFun SparkPunk Sequencer Kit</a>.</p> <h3>SparkFun Logo w/ ".com" and Flame</h3> <p>SparkFun-font w/ flame and ".com"</p> <h3>SparkFun Logomatic Logo - Silkscreen</h3> <p>Logo used on the <a href="https://www.sparkfun.com/products/12772">SparkFun Logomatic v2</a>.</p> <p>Silk is .4" by 1.1"<br> Board logo is .4" by 1.1" </p> <h3>GestureSense Logo</h3> <p>Used on the <a href="https://www.sparkfun.com/products/12780">ZX Distance and Gesture Sensor</a>.</p> <h3>Schematic Frame - A4L - European Format</h3> <p>Standard A4 size frame in Landscape</p> <h3>Breadboard-Spacing Reference</h3> <p>tDoc reference markings that correspond to solderless breadboard row spacing. Includes power rails and void space between rows.</p> <h3>SparkFun Smart Basic Logo - Silkscreen</h3> <p>Silkscreen logo for <a href="https://www.sparkfun.com/products/12935">SparkFun FTDI SmartBasic</a>.</p> <h3>SparkFun Education Mascot - Ludus! - Silkscreen</h3> <p>Ludus logo for SparkFun Education products.</p> <h3>Restriction of Hazardous Substances (RoHS) Logo</h3> <p>Logo for RoHS-certified hardware.</p> <h3>Lead-Free (No Pb) Logo</h3> <p>Logo for lead-safe certified hardware.</p> <h3>Qtechknow "MightyQ" Logo</h3> <p>Silkscreen logo used on the <a href="https://www.sparkfun.com/products/13614">Qduino Mini</a>.</p> <h3>Special Ordering/Production Instructions Alert</h3> <p>Symbol for special PCB ordering instructions or unique production process warnings.</p> <p><table border=1 cellpadding=1> <tr><th>Ordering Instructions</th><th>Production Instructions</th> <tr><td> <p><b>Types of information that should be added to box:</b> <ul><li>Copper weight</li><li>Soldermask color</li><li>Silk color</li><li>PCB thickness</li><li>Number of layers</li></ul></p> <p><b>PCB Standard:</b> <ul><li>1.6mm FR4</li><li>1 oz copper</li><li>immersion silver plating</li><li>red soldermask</li><li>white silkscreen</li></ul></p> </td> <td> <p><b>Types of information that should be added to box:</b> <ul><li>Special wash requirements</li><li>Depaneling instructions</li><li>Humidification</li><li>Glue curing</li></ul></p> </td></tr> </table></p> <p><b>Default text settings:</b> <ul> <li>0.07 inch</li> <li>9% ratio</li> <li>50% line distance</li> </ul> </p> Qwiic Logos for placement on schematic and PCB. The 5.5mm silk logo is best for placing next to Qwiic connector. <h3>Mechanical Specification for Raspberry μHat</h3> <p>The mechanical specification was pulled from their <a href = "https://github.com/raspberrypi/hats/blob/master/uhat-board-mechanical.pdf">Github page</a>. </p> Since Version 6.2.2 text objects can contain more than one line, which will not be processed correctly with this version.