// // SCRecorder.h // SCRecorder // // Created by Simon CORSIN on 27/03/14. // Copyright (c) 2014 rFlex. All rights reserved. // #import #import #import #import "SCRecordSession.h" #import "SCAssetExportSession.h" #import "SCImageView.h" #import "SCVideoConfiguration.h" #import "SCAudioConfiguration.h" #import "SCPhotoConfiguration.h" #import "SCRecorderTools.h" #import "SCRecorderDelegate.h" // Convenience #import "SCRecorderHeader.h" @interface SCRecorder : NSObject /** Access the configuration for the video. */ @property (readonly, nonatomic) SCVideoConfiguration * __nonnull videoConfiguration; /** Access the configuration for the audio. */ @property (readonly, nonatomic) SCAudioConfiguration *__nonnull audioConfiguration; /** Access the configuration for the photo. */ @property (readonly, nonatomic) SCPhotoConfiguration *__nonnull photoConfiguration; /** Return whether the video is enabled and ready to use. */ @property (readonly, nonatomic) BOOL videoEnabledAndReady; /** Return whether the audio is enabled and ready to use. */ @property (readonly, nonatomic) BOOL audioEnabledAndReady; /** Will be true if the SCRecorder is currently recording */ @property (readonly, nonatomic) BOOL isRecording; /** Change the flash mode on the camera */ @property (assign, nonatomic) SCFlashMode flashMode; /** Determine whether the device has flash */ @property (nonatomic, readonly) BOOL deviceHasFlash; /** Change the current used device */ @property (assign, nonatomic) AVCaptureDevicePosition device; /** The zoom factor applied to the video. */ @property (assign, nonatomic) CGFloat videoZoomFactor; /** The max zoom factor for the current device */ @property (assign, nonatomic) CGFloat maxVideoZoomFactor; /** Returns the max zoom factor for the given device */ - (CGFloat)maxVideoZoomFactorForDevice:(AVCaptureDevicePosition)devicePosition; /** Whether the zoom should be reset whenever the device changes. */ @property (assign, nonatomic) BOOL resetZoomOnChangeDevice; /** Get the current focus mode used by the camera device */ @property (readonly, nonatomic) AVCaptureFocusMode focusMode; /** Will be true if the camera is adjusting the focus. This property is KVO observable. */ @property (readonly, nonatomic) BOOL isAdjustingFocus; /** Will be true if the camera is adjusting exposure. This property is KVO observable. */ @property (readonly, nonatomic) BOOL isAdjustingExposure; /** The session preset used for the AVCaptureSession */ @property (copy, nonatomic) NSString *__nonnull captureSessionPreset; /** The captureSession. This will be null until prepare or startRunning has been called. Calling unprepare will set this property to null again. */ @property (readonly, nonatomic) AVCaptureSession *__nullable captureSession; /** Whether the recorder has been prepared. */ @property (readonly, nonatomic) BOOL isPrepared; /** The preview layer used for the video preview */ @property (readonly, nonatomic) AVCaptureVideoPreviewLayer *__nonnull previewLayer; /** Convenient way to set a view inside the preview layer */ @property (strong, nonatomic) UIView *__nullable previewView; /** If set, this render will receive every received frames as CIImage. Can be useful for displaying a real time filter for example. */ @property (strong, nonatomic) SCImageView *__nullable SCImageView; /** Set the delegate used to receive messages for the SCRecorder */ @property (weak, nonatomic) id __nullable delegate; /** The record session to which the recorder will flow the camera/microphone buffers */ @property (strong, nonatomic) SCRecordSession *__nullable session; /** The video orientation. This is automatically set if autoSetVideoOrientation is enabled */ @property (assign, nonatomic) AVCaptureVideoOrientation videoOrientation; /** The video stabilization mode to use. Default is AVCaptureVideoStabilizationModeStandard */ @property (assign, nonatomic) AVCaptureVideoStabilizationMode videoStabilizationMode; /** If true, the videoOrientation property will be set automatically depending on the current device orientation Default is NO */ @property (assign, nonatomic) BOOL autoSetVideoOrientation; /** The frameRate for the video */ @property (assign, nonatomic) CMTimeScale frameRate; /** The maximum record duration. When the record session record duration reaches this bound, the recorder will automatically pause the recording, end the current record segment and send recorder:didCompletesession: on the delegate. */ @property (assign, nonatomic) CMTime maxRecordDuration; /** Whether the fast recording method should be enabled. Enabling this will disallow pretty much every features provided by SCVideoConfiguration and SCAudioConfiguration. It will internally uses a AVCaptureMovieFileOutput that provides no settings. If you have some performance issue, you can try enabling this. Default is NO. */ @property (assign, nonatomic) BOOL fastRecordMethodEnabled; /** If maxRecordDuration is not kCMTimeInvalid, this will contains a float between 0 and 1 representing the recorded ratio on the current record session, 1 being fully recorded. */ @property (readonly, nonatomic) CGFloat ratioRecorded; /** If enabled, the recorder will initialize the session and create the record segments when asking to record. Otherwise it will do it as soon as possible. Default is YES */ @property (assign, nonatomic) BOOL initializeSessionLazily; /** If enabled, flips the video about its vertical axis and produce a mirror-image effect, when recording with the front camera. */ @property (assign, nonatomic) BOOL mirrorOnFrontCamera; /** If enabled, mirrored video buffers like when using a front camera will be written also as mirrored. */ @property (assign, nonatomic) BOOL keepMirroringOnWrite; /** Whether adjusting exposure is supported on the current camera device */ @property (readonly, nonatomic) BOOL exposureSupported; /** The current exposure point of interest */ @property (readonly, nonatomic) CGPoint exposurePointOfInterest; /** Whether the focus is supported on the current camera device */ @property (readonly, nonatomic) BOOL focusSupported; /** The current focus point of interest */ @property (readonly, nonatomic) CGPoint focusPointOfInterest; /** Will be true if the recorder is currently performing a focus because the subject area changed. */ @property (readonly, nonatomic) BOOL subjectAreaChanged; /** Will contains an error if an error occured while reconfiguring the underlying AVCaptureSession. */ @property (readonly, nonatomic) NSError *__nullable error; /** The underlying AVCaptureVideoDataOutput */ @property (readonly, nonatomic) AVCaptureVideoDataOutput *__nullable videoOutput; /** The underlying AVCaptureAudioDataOutput */ @property (readonly, nonatomic) AVCaptureAudioDataOutput *__nullable audioOutput; /** The underlying AVCaptureStillImageOutput */ @property (readonly, nonatomic) AVCaptureStillImageOutput *__nullable photoOutput; /** The dispatch queue that the SCRecorder uses for sending messages to the attached SCRecordSession. */ @property (readonly, nonatomic) dispatch_queue_t __nonnull sessionQueue; /** Create a recorder @return the newly created recorder */ + (SCRecorder *__nonnull)recorder; /** Create the AVCaptureSession Calling this method will set the captureSesion and configure it properly. If an error occured during the creation of the captureSession, this methods will return NO. */ - (BOOL)prepare:(NSError *__nullable *__nullable)error; /** Close and destroy the AVCaptureSession. */ - (void)unprepare; /** Start the flow of inputs in the AVCaptureSession. prepare will be called if it wasn't prepared before. Calling this method will block until it's done. If it returns NO, an error will be set in the "error" property. */ - (BOOL)startRunning; /** End the flow of inputs in the AVCaptureSession This wont destroy the AVCaptureSession. */ - (void)stopRunning; /** Offer a way to configure multiple things at once. You can call beginSessionConfiguration multiple times. Only the latest most outer commitSessionConfiguration will effectively commit the configuration */ - (void)beginConfiguration; /** Commit the session configuration after beginSessionConfiguration has been called */ - (void)commitConfiguration; /** Switch between the camera devices */ - (void)switchCaptureDevices; /** Convert a point from the previewView coordinates into a point of interest @return a point of interest usable in the focus methods */ - (CGPoint)convertToPointOfInterestFromViewCoordinates:(CGPoint)viewCoordinates; /** Convert the point of interest into a point from the previewView coordinates */ - (CGPoint)convertPointOfInterestToViewCoordinates:(CGPoint)pointOfInterest; /** Focus automatically at the given point of interest. Once the focus is completed, the camera device will goes to locked mode and won't try to do any further focus @param point A point of interest between 0,0 and 1,1 */ - (void)autoFocusAtPoint:(CGPoint)point; /** Continously focus at a point. The camera device detects when it needs to focus and focus automatically when needed. @param point A point of interest between 0,0 and 1,1, */ - (void)continuousFocusAtPoint:(CGPoint)point; /** Focus at the center then switch back to a continuous focus at the center. */ - (void)focusCenter; /** Refocus at the current position */ - (void)refocus; /** Lock the current focus and prevent any new further focus */ - (void)lockFocus; /** Set an active device format that supports the requested framerate and the current video size This changes the frameRate. @return whether the method has succeeded or not */ - (BOOL)setActiveFormatWithFrameRate:(CMTimeScale)frameRate error:(NSError *__nullable*__nullable)error; /** Set an active device format that supports the request framerate and size This changes the frameRate. @return whether the method has succeeded or not */ - (BOOL)setActiveFormatWithFrameRate:(CMTimeScale)frameRate width:(int)width andHeight:(int)height error:(NSError*__nullable*__nullable)error; /** Allow the recorder to append the sample buffers inside the current setted session */ - (void)record; /** Disallow the recorder to append the sample buffers inside the current setted session. If a record segment has started, this will be either canceled or completed depending on if it is empty or not. */ - (void)pause; /** Disallow the recorder to append the sample buffers inside the current setted session. If a record segment has started, this will be either canceled or completed depending on if it is empty or not. @param completionHandler called on the main queue when the recorder is ready to record again. */ - (void)pause:( void(^ __nullable)()) completionHandler; /** Capture a photo from the camera @param completionHandler called on the main queue with the image taken or an error in case of a problem */ - (void)capturePhoto:(void(^ __nonnull)(NSError *__nullable error, UIImage *__nullable image))completionHandler; /** Signal to the recorder that the previewView frame has changed. This will make the previewLayer to matches the size of the previewView. */ - (void)previewViewFrameChanged; /** Get an image representing the last output video buffer. */ - (UIImage *__nullable)snapshotOfLastVideoBuffer; /** Returns a shared recorder if you want to use the same instance throughout your app. */ + (SCRecorder *__nonnull)sharedRecorder; /** Returns whether the current queue is the record session queue. */ + (BOOL)isSessionQueue; @end